In stock Original Hubsan Zino 2 LEAS 2.0 Drone GPS 8KM 5G WiFi FPV with 4K 60fps UHD Camera 3-axis Gimbal RC Quadcopter Drones

Color: 1B Without Bag 2B Without Bag 1B With Bag 2B With Bag
Ships From: Czech Republic United States China Spain Russian Federation
List price: US $1,249.98
Price: US $549.99
You save:US $699.99 (56%)

Item Specifics

Brand Name:
HUBSAN
Material:
Plastic
Material:
Metal
Origin:
CN(Origin)
Aerial Photography:
Yes
Model Number:
Hubsan Zino 2
State of Assembly:
Ready-to-Go
Flight Time:
33mins (windless)
Type:
HELICOPTER
Controller Battery:
3350mAh
Features:
Remote Control
Dimensions:
32.60 X 26.00 X 9.49 CM
Remote Distance:
8KM
Warning:
as show
Charging Voltage:
17.4V (4S)
Controller Mode:
MODE2
Motor:
Brushless Motor
Warranty:
as show
Control Channels:
4 Channels
Charging Time:
as show
Plugs Type:
as show
Package Includes:
Original Box
Package Includes:
Other
Package Includes:
Camera
Package Includes:
Batteries
Package Includes:
Remote Controller
Package Includes:
Charger
Package Includes:
USB Cable
Package Includes:
Operating Instructions
Remote Control:
Yes
Power Source:
electric
Age Range:
8-11 Years
Age Range:
12-15 Years
Age Range:
Grownups
Age Range:
> 8 years old
Age Range:
> 14 years old
Age Range:
> 6 years old

Product Description

Hubsan Zino 2 LEAS 2.0 GPS 8KM 5G WiFi FPV with 4K 60fps UHD Camera 3-axis Gimbal RC Drone Quadcopter RTF

Enjoy Your Flight Right Now!
The remote control distance of Hubsan Zino 2 has been upgraded from 2.5km to 8km, which allowing you to take photos of further scenery and places. The camera is upgraded from 4k-30fps to 4k-60fps, and the images taken are more clear and exquisite. Larger lens size for better low-light effect. In addition, it also has a remote control with digital display which has a high brightness scree to allow you to track the flight data in real time and you can clearly see it under the strong light outdoors, so as to better enhance the user experience. The flight endurance of Hubsan Zino 2 can max. up to 33 minutes (in a windless environment), so that you to fully enjoy your flight in one go.

Specifications:

Hubsan ZINO 2 Size 32.60 x 26.00 x 9.49 cm
Weight (including battery and gimbal) 700g
Maximum Take-off Altitude 5000m
Max Flying Time 33mins (windless)
Max Hovering Time 32mins (windless)
Max. Endurance Mileage 20km (50km/h windless cruising)
Wind Resistance 5-level
Max. Tiltable Angle 25 degrees (normal mode);
35 degrees (sports mode)
Max. Rotational Speed 150 degrees/s
Max Speed Movie mode: 1m/s
Normal mode: 12m/s
Sport mode: 20m/s
Max Ascent Speed Normal mode: 3m/s
Sport mode: 5m/s
Max Descent Speed Normal mode: 2m/s
Sport mode: 3m/s
Working Temperature -10 Deg.C – 40 Deg.C
Working Frequency 5.725 – 5.850 GHz
Positioning GPS + GLONASS
Camera Image Sensor 1/2.3 inch CMOS sensor
View Angle 80°
Equivalent Focal Length 24-48mm
Aperture f/2.2
ISO Range Photography: 100-1600 (automatic); 100-3200 (manual)
Video: 100-3200 (automatic); 100-3200 (manual)
Shutter Speed 1/8000 – 1/30
Image Pixel 12MP
Compress Resolution 4K: 3840*2160 30/60fps /
2.7K: 2704*1520 30/60fps /
1080P: 1920*1080 30/60/120fps /
720P: 1280*720 30/60/120/200fps
Video Maximum Bitrate 100Mbps
Support File System FAT32
Image Format JPEG/DNG (RAW)
Video Format MP4 / MOV (h.264 / mpeg-4 AVC)
Gimbal Structural Design Range Pitch: -135 degrees to 45 degrees;
Roll: -40degrees to 40 degrees;
Shift: -35 degrees to 35 degrees
Controllable Rotation Range Pitch -90 degrees to 0 degrees
Stability System 3-axis gimbal
Maximum Control Speed (Pitch) 100°/s
Angle jitter ±0.01°
Image Transmission Scheme LEAS 2.0
Distance 8KM
Transmission power (EIRP) <=26dbm
Band 5.725-5.850 GHz
Battery Capacity 3800 mAh
Nominal Voltage 17.4V (4S)
Charging Limit Voltage 17.6V
Battery Type intelligent lithium battery, accurate calculation of battery power,
ensure the safety of battery life
Energy 66.12Wh
Weight 310 g
Charging Environment Temperature -10 Deg.C- 40 Deg.C
Maximum Charging Power 52.2W
Charger Input Voltage 100V-240V
Input Current 2A
Output Voltage 17.1V-18.9V
Output Current 0.0- 3.33A
Rated Output Power 54W
Remote Control Operating Frequency 5.725-5.850 GHz
Maximum Effective Signal Distance 8KM (No interference, No obstacle)
Operating Environment Temperature -10 Deg.C- 40 Deg.C
Built-In Battery 3350mAh
Mode Mode 2 (Left Hand Throttle)
Working Current/Voltage 3.7V, 1400mA (connecting the android devices);
750mA 3.7V (connecting the iOS devices)
Support Mobile Device Size Maximum Length: 160mm;
Thickness: 6.5 – 8.5mm
Interfaces Type Ligh&tning / Micro USB / Type-C
Charging Micro USB


Features:
8KM upgraded remote control distance, the image transmission distance is even more distant
– 4K-60fps camera, support RAW format, photo lossless output and time-lapse shooting
– 1/2.3 inch CMOS larger lens size, better low light effect
– Remote controller with digital display, visible in strong lights
– The flight endurance up to 33 minutes (windless); Accurate battery power monitoring
– Update the latest firmware of aircraft and remote control online through App
– Negative film are downloaded directly via a wireless link
– The gimbal is detachable
– Support using the transmitter to control the drone DIRECTLY

Package Included:
1 x ZINO 2 RC Drone
1 x Remote Control
2 x Blade
2 x Blade Screw
1 x Charger
1 x Screwdriver
1 x Remote Control USB Charging Cable
1 x Battery
1 x English Manual

Q: Where can I find the updated tutorial video of Hubsan ZINO 2?

Q: What is the purpose of the change log (for drones)?
A: 1.Improved the image and video transmission quality
2.Optimize online upgrade
3.Add the function that you can record video in line fly mode
Q: How to solve the issue that the forced online upgrade is stuck
and the upgrade is not completed?
A:1.Update the APP Version Android V1.1.3 and IOS V1.1.6
2.After installing the APP, open the remote control and connect to the APP and click to update the firmware of the remote control when connected (the aircraft does not need to be turned on).
3.After the remote controller update is completed, turn on the aircraft to connect to the remote controller and update the aircraft firmware again (to ensure that the remote controller is fully charged)
4.If the remote control cannot be connected to the aircraft, you need to determine the status of the indicator light next to the SD card of the aircraft. Normally, the light is yellow (that is the green light and the red light are always on at the same time).
Q: What should I do if the indicator is abnormal?
A: Please refer to the following for troubleshooting status
The IT firmware upgrade led light status: the upgrade red light flashes quickly, and finally turns solid (Red light and green light is always on at the same time means yellow light)
IT firmware upgrade failed indicator (red light status):
1. The red light is off: you need to re-burn through the USB cable (refer to Zino2 firmware package upgrade instructions on the official website,);
2.The red light slow flashing: the image is faulty and needs
inspection and maintenance
The PW firmware upgrade light status: the upgrade green light flashes quickly and then slowly flashes and turns off, and then turns on (the red light and green light are always on at the same time means the yellow light).
Upgrade completion status: The green light is solid and turns to yellow light solid. The green light will turn off after a period of time and then light up again. The interface will show that it is
not connected to the aircraft, just wait for the aircraft to reconnect automatically.
Upgrade failed PW indicator (green light status):
The green light keeps flashing slowly: Turn off the aircraft,
Using the computer to create a folder in the root directory of the SD card, named repeatorfw and then copy the upgrade file under the ZINO2-PW file to this “repeatorfw” folder. After inserting the SD card into the aircraft, turn it on and wait for about three to four minutes to finish the upgrade(the green light will be on, and then turn to the yellow light solid.)
The green light is off (requires a tool to update the PW firmware): copy the upgrade file to the SD card as above, insert the SD card into the aircraft, Using a needle-like object to long
press the binding key and power on the drone at the same time, and then release the binding key after booting, the aircraft enters the upgrade Mode (green light flashes), the green light is off after the upgrade is completed.
Q: How to upgrade SD card?
A: The following is the SD card upgrade instructions
Using the computer to create a folder in the root directory of the SD card, named repeatorfw and Copy the PW firmware into the SD card and then put it the drone, Finally it will do automatically upgrade after turning on;
Upgrade status: green light indicator next to the SD card slot;
The green light flashes quickly after about 15 seconds of booting: the PW firmware is being upgraded; (Note: the power cannot be cut off during the upgrade!)
Green light flashes slowly: data is being read and written
Green light is off: waiting for restart
Solid green or yellow: The PW firmware upgrade is complete


Learn what other say about this product

Customer reviews

G***n
Verified buyer

Everything is wonderful!!! Today even flew ten minutes! Be sure to add a little later.

J***k
Verified buyer

Again, Charger plug with adaptor does not fit for EU. Otherwise OK.

R***g
Verified buyer

Хороший аппарат, рекомендую. На открытой местности пробовал высоту 300+ метров, расстояние 800+ метров. Потом попробую выше и дальше. Учитесь управлять подальше от людей, домов и столбов. Держите детей подальше, они хотят в него кинуть что-нибудь и взяться за него. Качество видео и фото отличное, но нужно настраивать баланс. Качество связи с пультом хорошее, но в городе на указанных высотах картинка начинает теряться. Если залететь за дом, то связь ухудшается. Заряда аккумулятора хватает на 25 минут. Покупайте второй аккумулятор обязательно, а лучше два. Вначале управлять сложно. Функций много. Но потом станет легче. Главное учитесь подальше от препятствий. Продавца рекомендую. На связи. Заказ дошёл до Видного Московской области за три дня с момента заказа.

G***y
Verified buyer

Ordered with delivery from Russia came in less than a week in the locations of the joints of the case there are small pollution also on the body found four scratches, on the protection of the suspension on both sides and also on two legs as if it was scratched against the asphalt maybe it was in operation (((

A***v
Verified buyer

Ура!!! Я наконец получил свой квадрокоптер)))) Радости нет предела☺️ Так теперь о главном заказывал с Китая, 16 июня продавец месяц не мог отправить. Дал сначала левый трек номер, как только посылка чекнулась вес был 200 грамм. Написал ему ответил в духе - "ой что то пошло не так, ждите исправим". Не исправил товара у него на складе не оказалось. и 4 дня назад предложил отправить этот же дрон из России. за 2 дня все доставили. Фух я правда уже не надеялся)) И томоженного сбора не было пока не успел вскрыть, для обзора...

R***r
Verified buyer

The drone came and I am happy with it. It does exactly what it's supposed to. I can recommend the drone but not the factory/store. If I should/would buy another one I would definetly buy from other seller and/or factory. Delay after delay for the package sending, got a first fake tracking number just to delay the sending more, etc. China 2025 is a dream. They might be producing better quality goods but they will never have the service and customer quality of Western countries.

A***y
Verified buyer

2 months to Magnitogorsk

T***n
Verified buyer

Meget hurtig levering til Denmark TAK

K***v
Verified buyer

great

D***t
Verified buyer

First dron and fantastic feeling. Video and pic are also in expected quality

T***n
Verified buyer

OK Hurtig delivery Branch

Write a customer review: