High Quality APM 2.5 2.6 2.8 Pixhawk Power Module 30V 90A With 5.3V DC BEC Available with T or XT60 For RC Drone

Color:
List price: US $4.99
Price: US $4.39
You save:US $0.60 (12%)

Item Specifics

Brand Name:
U-Angel-1988
Origin:
CN(Origin)
Material:
Rubber
Tool Supplies:
Assembled class
Upgrade Parts/Accessories:
APM Power Module
RC Parts & Accs:
Spinners
Use:
Vehicles & Remote Control Toys
Technical parameters:
Value 2
Model Number:
FZFY0802
Remote Control Peripherals/Devices:
APM Power Module
For Vehicle Type:
Airplanes
Four-wheel Drive Attributes:
Assemblage

Product Description

The APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.
Used to detect the battery voltage and the battery current, flight control board receives two signals, calculate the remaining battery power, estimate the remaining flight time. In addition the module also comes with BEC function, you can output 5.3 DC, 3A maximum continuous current for the flight control board to provide a stable power supply. Another signal cable connectors are used in Japan original fittings, non-domestic joint, so APM flight control board and reliable connection between the power supply module.

Deans Plug
Max input voltage: 30V
Max current sensing: 90A
Voltage and current measurement configured for 5V ADC
Switching regulator outputs 5.3V and 3A max
6P molex cable plugs directly to APM/Arduflyer 2.5's 'PM' connector
Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry). It is not designed to power servos. Use your aircraft's own ESC/BEC for that.
Color: black& red
Size:137mm
Cable length: 192mm
Net Weight: 27g

XR60 plug

Max input voltage: 30V
Max current sensing: 90A
Size:25*21*9mm
Net weight:25g
Weight :35g
Voltage and current measurement configured for 5V ADC
Switching regulator outputs 5.3V and 3A max
6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector
Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It isnotdesigned to power servos. Use your aircraft's own ESC/BEC for that.
The maximum input voltage 20V, maximum current measurable 90A, to achieve the control panel on battery power and voltage monitoring. The design parameters of voltage and current detector design parameters consistent with 3DR official ground station (mission planer) settings can be set directly refer to the official Wiki.

Note: The Power Module is only designed to power APM/Arduflyer, a RC receiver and accessories (GPS, Radio telemetry). It is not designed to power servos. Use your aircraft's own ESC/BEC for that.

Packet content: 
  • 100% Brand New
  • 1 x Power Module
    1 x P cable 150mm


Learn what other say about this product

Customer reviews

A***p
Verified buyer

recommend

Z***s
Verified buyer

Product as described.

A***y
Verified buyer

Everything works fine, the delivery is normal.

V***R
Verified buyer

Arrived tardissimo, package intact well packed, thank you

F***z
Verified buyer

As described, I recommend store, fast shipping without testing

S***s
Verified buyer

Very useful.

V***z
Verified buyer

Correct

Customer
Verified buyer

ok

Y***h
Verified buyer

Ok.

M***r
Verified buyer

Perfecto

A***k
Verified buyer

Good job

G***r
Verified buyer

Класс

A***a
Verified buyer

All good

O***v
Verified buyer

ok

Write a customer review: